1/2/5Pcs XH‑M452 DC12V Dual Output Automatic Temperature Humidity Control Module

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
1/2/5Pcs XH‑M452 DC12V Dual Output Automatic Temperature Humidity Control Module
Popular
Popular
Product Introduction
Specifications:
• Power supply: DC 12 V
• Temperature measurement range: -40 to 120℃ (-40 to 248°F)
• Humidity range: 0~100% RH
• Control precision: 0.1℃, 0.1% RH
• Test probe: Integrated sensor
• Output: 10A delay
• Dimensions: 65 x 55 x 28 mm
Temperature control:
1) Set the temperature (+): Normal display mode, long press the (+) key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, incorrect operation after 5 seconds, automatically return to detect temperature display
2) Set the temperature (-): Normal display mode, long press (-) button for 3 seconds, stop numerical flashing temperature, press the + / - key set value
3) Restore the factory settings: At the same time long press temperature, and humidity (+) key for 3 seconds, digital display, 888, 888
4) Set the start temperature: Long press the (+) key, start the flashing temperature, set start temperature by + / - key
5) Set stop temperature: Long press (-) button, stop flashing temperature, set stop temperature by + / - key
6) Set to start humidity: Long press the (+) key, start the humidity value flashing, set by + / - key launch humidity value
7) Set stop humidity: long press (-) to stop humidity value, set by + / - key to stop the humidity value
Package Included:
1 x DC 12V XH-M452 LED Digital Display Dual Output Thermostat Temperature Controller
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
1/2/5Pcs XH‑M452 DC12V Dual Output Automatic Temperature Humidity Control Module
Product Introduction
Specifications:
• Power supply: DC 12 V
• Temperature measurement range: -40 to 120℃ (-40 to 248°F)
• Humidity range: 0~100% RH
• Control precision: 0.1℃, 0.1% RH
• Test probe: Integrated sensor
• Output: 10A delay
• Dimensions: 65 x 55 x 28 mm
Temperature control:
1) Set the temperature (+): Normal display mode, long press the (+) key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, incorrect operation after 5 seconds, automatically return to detect temperature display
2) Set the temperature (-): Normal display mode, long press (-) button for 3 seconds, stop numerical flashing temperature, press the + / - key set value
3) Restore the factory settings: At the same time long press temperature, and humidity (+) key for 3 seconds, digital display, 888, 888
4) Set the start temperature: Long press the (+) key, start the flashing temperature, set start temperature by + / - key
5) Set stop temperature: Long press (-) button, stop flashing temperature, set stop temperature by + / - key
6) Set to start humidity: Long press the (+) key, start the humidity value flashing, set by + / - key launch humidity value
7) Set stop humidity: long press (-) to stop humidity value, set by + / - key to stop the humidity value
Package Included:
1 x DC 12V XH-M452 LED Digital Display Dual Output Thermostat Temperature Controller
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.