-40%
Dell Equallogic PS6210 24x 2.5" NO Caddies/HDDs 2x type 15 10GBE 2x PSUs + Bezel
$ 1056
- Description
- Size Guide
Description
For sale is a working Dell Equallogic PS6210 Storage Array with 24x 2.5" bays (NO Caddies/HDDs), 2x type 15 10GBE controllers (SFP+ & Copper), 2x 700w PSU and front security bezel. Array has been reset and login is grpadmin / grpadmin. Array shows no alerts as evidenced by blue status light shown.Console output from controller:
[ENTRY][0][EQL][WRESET]
[ENTRY][0][EQL][WDOG][210][WFP][MINIT][MSIZE][MLEV0][MLEV1][MLEV2][MLEV3][SCRUB][DDRP][BOOT2][PROC][BOARD][SMP][PCIE][FLASH][NAE][USB]
#########################################################
# #
# Dell (tm) Inc. Storage Array #
# Copyright 2001-2012 #
# #
# Controller Information: #
# Part=70-0425 Rev=A02 SN= 77921054O00DB ECO=C00 #
# #
#########################################################
Bootloader Version 4.4.4 (SWINT Rev:4)
Compiled on Wed Nov 20 16:26:57 EST 2013
(type h for help)
Enter Ctrl-P for boot prompt
Executing bootcmd0 [dload sd primary/eqlstor.gz]
0X80231000/11912 0X85f08100/40013340 entrypt 80231000
Executing bootcmd1 [run]
cpu_online_map=ffff, userapp_cpu_map ffff
psb_os_active_mask=0, psb_os_mask=0
boot1_info: userapp_cpu_map=ffff, psb_os_cpu_map=0
cpu_online_map = 0xffff
Jumping to the application... 0x80231000
------------------------------------------------------------
Preparing ffff bitmask of cpus to run
No network device to cleanup
count = 16, total = 16
All slave cpus (16) ack'ed userapp init
count = 4, total = 4
All slave cpus (4) ack'ed message ring init
============ cpu_0 ==============
func = 0x80231000, args = 0x0
sp = 0xffffffff8f24dfe0, gp = 0xffffffff8f24c000
master_cpu = 0, master_mask = 00000001, buddy_mask = 0000ffff
psb_os_cpu_map = 00000000, mode = 1, kseg_master = 0
app_shared_mem: addr = 0000000000000000, size = 0000000000000000, orig = 0000000000000000
Dell Inc. Storage Array
Copyright 2001-2015 Dell Inc.
plat_pfgxlp_wait_for_battery: Smart Battery Remaining Capacity = 506 mAh after 0-second delaySP:1.00:cache_driver.cc:1058:INFO:28.2.39:Active control module cache set to write-back mode.
SP:10.62:mips_pss_init.c:363:INFO:28.2.107:Control module in slot 0 with serial number CN-0D85Y9-77921-54O-00DB is designated as active.
SP:1610994785.02:ppool_nvram.c:380:WARNING:15.3.0:NVRAM contains valid data. This is a POWER FAILURE RECOVERY.
MFS set up
Building databases...
Restoring password file...
SP:1610994788.50:emm.c:1333:INFO:28.2.6:Enclosure serial number: CN-0WK7G2-70821-51R-1DJT-A01.
Mon Jan 18 13:33:26 EST 2021
Jan 18 13:33:26 init: kernel security level changed from 0 to 1
PS Series Storage Arrays
Unauthorized Access Prohibited
login: grpadmin
Password:
Welcome to Group Manager
Copyright 2001-2015 Dell Inc.
netmgtd:1610994816.78:rcc_util.c:1024:INFO:25.2.9:CLI: Login to account grpadmin succeeded, using local authentication. User privilege is group-admin.
netmgtd:1610994816.78:rcc_util.c:1032:AUDIT:25.7.0:CLI: Login to account grpadmin succeeded, using local authentication. User privilege is group-admin.
It appears that the storage array has not been configured.
Would you like to configure the array now ? (y/n) [n]