Digital LED Thermostat Temperature Controller with Probe 9-99°C TMC-6060

Description

Digital LED Thermostat Temperature Controller with Probe 9-99°C TMC-6060
Features:
Maximum temperature, lower temperatures were arbitrarily set.
Cooling and heating mode can be choose.
Sensor waterproof design, even line of skin damage due to leakage will not cause electric shock.
Can be used in fish tank, farming, agriculture, intelligent home, food, industry, and so on.
Exquisite appearance, but practicality.
Electrical characteristics of product:
Temperature range:  temperature from minus 9℃to 99℃
Resolution:  temperature  0.1℃
Measurement accuracy:  ±0.1℃
Control precision: 1℃
Backlash accuracy: 1℃
Refresh rate: 0.5 second
Input voltage: AC110-240V
Measuring input  : NTC(10K0.5%) Waterproof  type sensor
Output : relay  10A one road
Environments requirement: temperature from minus 10℃to 60℃ , humidity from 20% to 85%
Product size:144mm(long)*99mm(wide)*44mm(high)
Power dissipation : static current≤40MA, attraction  current≤65MA
Instructions:
Start lights:  The equipment is Start to work when the red light on
Stop lights: The equipment is stop working when the red light off
Digital tube:
The actual temperature were display in the middle of red Digital tube
The setting temperature to start were display on the left side of yellow Digital tube
The stop temperature of setting were display on the right-hand side of yellow Digital tube
Button  instruction:
Start "triangle":  set the temperature to start
Stop "triangle":  set the temperature to stop
Setting  instruction:
< 1: Mode setting
Hold down the Start "erected triangle" button and power on again,At this time the digital tube displays-- E0.0 --,Press  Stop "Inverted triangle" to adjust the mode.
The pattern is as follows:
E0.0  Temperature control mode ,  E0.1   Intermittent control mode
E0.2  Countdown control mode  ,  E0.3   Reservation control mode
<2: Calibration error
Hold down the Stop "Inverted triangle" key when the power is off ,Then power on again,The thermostat enters the calibration error state.The error value is shown in the middle of the digital tube.It can be adjusted the numerical values by pressing the Start "triangle" button,The maximum is 9, and the minimum is -9.
<3:E0.0  Temperature control mode:
A:Refrigeration  Mode:
The refrigeration equipment will start to work if the setting temperature of start is greater than stop and the testing temperature is greater than or equal to beginning.
The refrigeration equipment will stop to work if the testing temperature less than or equal to stop temperature,and it is changes back to its original state if  the temperature of  testing is greater than beginning and is less than stopping.
B:Heating  Mode:
The Heating equipment will start to work if the start temperature of set is less than stop and the temperature of testing is small or equal to beginning.
If the testing temperature greater than or equal to stop temperature ,the Heating  equipment will stop to work,W hen the temperature of testing is greater than beginning and is less than stop,  keep the original state relay.
C:When the temperature is more than 99℃,the digital tube will show HHHHHH .
When the temperature is below minus 9℃. The digital tube will show LLLLLL  .
When sensor without be detected, the digital tube will show EEEEEE   .
<4:E0.1Intermittent time control mode
The middle digital tube shows "E0.1". Flashes once per second.
E0.1 The left-hand side corresponds is stopping time:Press "triangle" keys (1 ~ 99 minutes) to set up.
E0.1 The right-hand side corresponds is  opening time:Press "triangle" keys (1 ~ 99 minutes) to set up.
For example ,Set "05" to the left of E0.1,The right setting"10"of "F1,It's means stop for 5 minutes and turn on for 10 minutes.The red indicator goes out when the engine is stopped,The red indicator light is on when the machine is boot,So cycle.
<5: E0.2 Countdown time control mode:
The middle digital tube shows "E0.2". Set the range: 0001 ~ 9999 minutes,Flashes once per second.
E0.2 Left side corresponding time:You can set it 1-99,Timing hour of time.
E0.2 Right side corresponding time:You can set it 1-99,Timing minutes and seconds of time.
For example ,E0.2 The left digital tube is set to "12",The right digital tube is set to "00",The timing time is 1200 minutes,It means the timing time is 20 hours.
When arrive at the set time, the plug will be turned off and the red light will go out.It is used for regular shutdown, such as electric car charging, etc.
<6:E0.3"Appointment time control mode
Intermediate digital tube display "E0.3",The setting range is between 0001-9999 minutes.
E0.3 Left side corresponding time:You can set it 1-99,Timing hour of time.
E0.3 Right side corresponding time:You can set it 1-99,Timing minutes and seconds of time.
For example ,E0.3The left digital tube is set to "12",The right digital tube is set to "00",The timing time is 1200 minutes,It means the timing time is 20 hours.
When arrive at the set time, The socket will open and the red light will be light,It can be applied to the scheduled reservation boot.
Applications:
1. In the aspect of raise sets , the product is can be applied to fish tank, aquarium and crawler box etc.
2.In terms of farming , the product is can be applied to incubation and brood, temperature rise and keep , ventilation and heat dissipation, temperature detection  and warning etc.
3.In agriculture,  the product is can be applied to strain culture fermented, seedling  culture , green house, cultivation and management of flowers and edible fungi etc.
4.In the aspect of intelligent home , the product is can be applied to floor heating,  water heating , heater, electrothermal membrane , electrothermal bed , electric blanket  and electric fan etc.
5.In terms of food , the product is can be applied to make wine , fermented glutinous   rice wine, flour fermentation , bean sprouts are cultivated , yogurt production , preservation of fruits and vegetables etc.
6.In industry , the product is can be applied to temperature control cabinet , oven of   experiment and warehouse monitor etc.
The operation panel and Wiring diagram:
Package Included:
1 x Digital LED Thermostat Temperature Controller
We accept PayPal .
We ship item to your PayPal verified address.
Payment must be received within 3 days from the date of purchase.
We ship items to following 48 States excluded Alaska/Hawaii, APO/FPO, US Protectorates, PO Box.
Orders will be processed and shippied within 24 hours after your full payment is confirmed by us.
We have warehouse in ,KY. We will ship item from the warehouse near destination if the item are available in these 2 warehouses. We ship item from the warehouse if item is in stock in the one warehouse.
To safety, we will ship to Paypal Confirmed addresses (your credit rd billing address must match the shipping address you provide during checkout.) If you would like your item to be shipped to an address other than your billing address, please contact us through Ebay, Any non-received items usd by invalid address registered on Paypal are not in our refund or replacement policy.
Notice: We are not responsible for customs, duties or taxes associated with any order, nor will be your order as a gift.
1. Our listing price includes the value of goods,packaging cost,and export
taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3.
T
he duties are buyers' responsibility
.Please check with your country's
customs office determine what these additional costs will be prior to your
purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.
1. Any questions,
pls. contact us via ebay message or email us.
We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again beuse sometimes our message system may block some emails.
2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "
5
" in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.
We strive to keep all our customers satisfy.
We will do our up most to exceed your expectations in customer service, communition and dispatching of your orders.