DST1000 STC1000 DC 12-72V 12V 24V AC 110-220V Thermostat Temperature Controller

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
DST1000 STC1000 DC 12-72V 12V 24V AC 110-220V Thermostat Temperature Controller
Popular
Popular
Product Introduction
Description:
DST1000 Temperature Controller
Product Name：Temperature Controller
Product Model：DST1000
Supply Voltage：DC12~72V
Temperature Range：-50~+120°C
Temperature Measurement Accuracy：±0.5°C（In the range of -10~+85°C）
Line length：1m
Size：75mm*85mm*35mm
Applicable Scene：Various Sensor Control Boxes、Water Heater、Freezer、Fan
（Not limited to the devices）
Temperature Setting
Heating and Cooling Mode Setting
Setting(Starting Temperature):
Press and hold the▲button 3 seconds to Start Temperature flashing,Use▲▼button to set Start Temperature value
Setting(Stop Temperature):
Press and hold the▼button 3 seconds to Stop Temperature flashing,Use▲▼button to set Stop Temperature value
Cases 01 Control Water Heater
Heating to 65℃ to stop, the temperature drops back to 50℃ and heating again
Step1:Heating mode,Starting Temperature＜Stop Temperature.
Step2:Press and hold the▲button 3 seconds to Start Temperature value flashing. Use▲▼ to set the Starting Temperature to 50℃.
Step3:Press and hold the▼button 3 seconds to Stop Temperature value flashing. Use▲▼ to set the Stop Temperature to 65℃ and the setting is completed.
The button does not operate for 5 seconds and automatically returns to the normal display state.
Cases 02 Control Farm Fan
The fan is ventilated to 26℃ to stop, the temperature is raised to 30℃ and the ventilation is started again.
Step1:Cooling mode,Starting Temperature＞Stop Temperature.
Step2:Press and hold the▲button 3 seconds to Start Temperature value flashing. Use▲▼ to set the Starting Temperature to 30℃.
Step3:Press and hold the▼button 3 seconds to Stop Temperature value flashing. Use▲▼ to set the Stop Temperature to 26℃ and the setting is completed.
The button does not operate for 5 seconds and automatically returns to the normal display state.
Package Included:
1PC*DST1000 DC 12-72V Temperature Controller Thermostat DS18B20 Cable Better STC1000
STC1000 Temperature Controller
This mini Temperature Controller is an excellent and convenient multifunction device for controlling temperature in Aquariums. The stability of aquarium temperature is one of the crucial factors that contributes to the health and safety of your fish. By utilizing the temperature controller, you can provide an environment with optimal temperature for your fish. This advanced temperature controller can measure and control temperature from -50 to 90 °C.
This device is also suitable for Laboratories use and other temperature-controlled systems.
Mini and light weight design
Large and clear LCD display
Wide Temperature Range (-50-90 Deg.C)
Dual heating and cooling function
Automatic over temperature alarm
Control temperature by setting the temperature set value and the different value
Temperature Calibration
Refrigerating control output delay protection
Wiring diagram for installation included
Specifications:
Color:Black
Applications:Aquarium, Terrarium, Vivarium, Paludarium ,Chicken Incubator
Temperature Measuring Range: -50 - 90 Deg.C
Control temperature range: -50 - 90 Deg.C (adjustable)
Control temperature difference: 0.3 - 10 Deg.C (adjustable)
Resolution: 0.1 Deg.C
Accuracy: ± 1 Deg.C (-50 - 70 Deg.C)
Sensor: NTC sensor
Sensor error delay: 1 minute
Relay contact capacity (Heating): 10A (max) 250 V
Relay contact capacity (Cooling): 10 A (max) 250 V
Compressor delay protection time: 1 ~ 10 minutes (adjustable)
Operating Temperature: 0 - 60 Deg.C
Storage Temperature: -30 - 75 Deg.C
Operating Relative Humidity: 20 ~ 85 % (No condensation)
Alarm Output : Buzzer
Power Supply: 110~ 220V AC ± 10% , 50 / 60 Hz
Power consumption: < 3 W
Cable length: 1 M
Item dimensions: approx. 84*69*34 MM
Net weight:138g
Package Included:
1PC*Mini-Temperature Controller
Description:
1.Brand New High Quality
2.The probe the temperature sensor DS18B20 original chip
3.High quality stainless steel tube encapsulation waterproof moistureproof prevent rust
4.Stainless steel shell 6*50mm
5.Power supply range: 3.0V to 5.5V
6.Operating temperature range: -55°C to +125°C (-67°F to +257°F)
7.Storage temperature range: -55°C to +125°C (-67°F to +257°F)
8.Accuracy over the range of -10°C to +85°C: ±0.5°C.
9.No other components, unique single bus interface
10.Output lead: red (VCC), yellow(DATA) , black(GND)
11.Cable length: 100 cm
Package Included:
1PC*DS18B20 Temperature Sensor Thermal Probe Thermometer Waterproof F Arduino
Features:
This temperature sensor is used in home air conditioning, car air conditioners, refrigerators, freezers, water heaters, drinking fountains, heaters, dishwashers, disinfection cabinets, washing machines, dryers, and in the low-temperature oven, incubators and other occasions.
Specifications:
Measurement range: -30 to 110 °C
Length of wire: 1.5m
Size of probe: 4 x 30 mm
Output： 2 wires
Type: NTC 10k±1% 3435
Package Included:
1PCS NTC 3435 10K Ohm 1% Thermistor Temperature Sensor Cylinder Probe 1.5M Wire
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.